The
CRONOR second counter is used in all situations
where it is necessary or useful to display and check
directly the passing of the minutes and seconds: for
example in operating theatres, outpatient units, test
laboratories, food production firms, television and
radio studios, swimming pools and sports facilities
and monitored production processes, etc..
With a double dial for the clock and for the second
counter, CRONOR allows
a direct, constant and simultaneous check on the time
and the passing of minutes and seconds.The second
counter is controlled by synchronous motors that allow
precise and silent movement and zero-setting. The
clock can also be controlled by centralised systems
or with an independent movement.
The operations of start, stop and reset are carried
out from a keypad supplied as an optional. CRONOR
is also available in the various versions: with hour
counter and with the sole function of second
counter and minute counter with a single dial.
BUILT-IN VERSION Case
in steel painted with epoxy resins and with
support for wall mounting; the projecting part
is covered by an AISI
204 stainless steel frame and a back
frame for wall mounting. Weight
without packing: 14kg
WALL VERSION Case
in satin finishAISI 304 stainless steel
throughout. Weight
without packing: 12kg
CLOCK
POWER SUPPLY 220V
- 50 Hz with quartz movement with power reserve; pulse
receiver with reversed polarity. SECOND COUNTER POWER SUPPLY 220V
- 50 Hz. DIAL PROTECTION 3
mm thick mineral glass.
The
technical details and data may change as a result of improvements
to the products or by specific request.
Case
in steel painted with epoxy resins and with
support for wall mounting; the projecting part
is covered by an 
